Package ContentsInstallation Requirements
System Requirements
Hardware OverviewLEDPorts Show Ethernet The 10/100 Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. Power can be provided by any of the following:
Reset The Reset button serves two functions for the UniFi AP:
Locking Clip During installation, the Locking Clip on the Mounting Bracket locks into the Locking Notch on the UniFi AP to help prevent theft. Mounting Bracket This bracket is used for wall or ceiling mounting. Hardware InstallationWall MountOptional Optional Note: If the Ethernet cable feeds along the mounting surface, then remove the Cable Feed Plug on the side of the UniFi AP instead. Ceiling MountConnecting PowerNote: The UAP/UAP-LR uses 24V passive PoE. PoE must be manually enabled on the switch. OR Optional SpecificationsUAP/UAP-LR Dimensions 200 x 200 x 36.5 mm (7.87 x 7.87 x 1.44") Weight 290 g (10.23 oz) with Mounting Kit430 g (15.17 oz) Networking Interface (1) 10/100 Ethernet Ports Buttons Reset Power Method Passive Power over Ethernet (12-24V) Power Supply 24V, 0.5A PoE Adapter (Included) Power Save Supported Operating Frequency UAP2.4 GHz UAP-LR2.4 GHz Max. Power Consumption UAP4W UAP-LR6W Max. TX Power UAP20 dBm UAP-LR27 dBm Antenna Integrated Omni Antenna Gain 4 dBi Wi-Fi Standards 802.11 b/g/n (2.4 GHz) Wireless Security WEP, WPA-PSK, WPA-Enterprise (WPA/WPA2, TKIP/AES) BSSID Up to Four per Radio Mounting Ceiling/Wall (Kits Included) Operating Temperature -10 to 70° C (14 to 158° F) Operating Humidity 5 - 80% Noncondensing Certifications CE, FCC, IC |